TANDBERG Video Communication Server Administrator's Manual page 198

Table of Contents

Advertisement

Grey Headline (continued)
Command reference - xConfiguration
Bandwidth Pipe [1..100] Bandwidth PerCall Limit: <1..100000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call.
Default: 1920
xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Limit: 256
Example:
Bandwidth Pipe [1..100] Bandwidth PerCall Mode: <Limited/Unlimited/NoBandwidth>
Determines whether or not this pipe is limiting the bandwidth of individual calls.
NoBandwidth: no bandwidth available. No calls can be made on this pipe.
Default: Unlimited
xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Mode: Limited
Example:
Bandwidth Pipe [1..100] Bandwidth Total Limit: <1..100000000>
If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe.
Default: 500000
xConfiguration Bandwidth Pipe 1 Bandwidth Total Limit: 1024
Example:
Bandwidth Pipe [1..100] Bandwidth Total Mode: <Limited/Unlimited/NoBandwidth>
Determines whether or not this pipe is enforcing total bandwidth restrictions.
NoBandwidth: no bandwidth available. No calls can be made on this pipe.
Default: Unlimited
xConfiguration Bandwidth Pipe 1 Bandwidth Total Mode: Limited
Example:
Bandwidth Pipe [1..100] Name: <S: 1, 50>
Assigns a name to this pipe.
xConfiguration Bandwidth Pipe 1 Name: "512Kb ASDL"
Example:
Call Loop Detection Mode: <On/Off>
Specifies whether the VCS will check for call loops.
Default: On
xConfiguration Call Loop Detection Mode: On
Example:
Call Routed Mode: <Always/Optimal>
Specifies whether the VCS routes the signaling for calls.
Always: The VCS will always route the call signaling.
Optimal: If possible, the VCS will remove itself from the call signaling path, which may mean the call does not consume a call licence.
Default: Always
xConfiguration Call Routed Mode: Always
Example:
Overview and
Introduction
Getting started
status
D14049.05
February 2009
System
VCS
Zones and
configuration
configuration
neighbors
Call
Bandwidth
processing
control
198
TANDBERG
VIDEO COMMUNICATIONS SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Video Communication Server and is the answer not in the manual?

Table of Contents