System Configuration; Configuring Sip - Registrations, Protocols And Ports - TANDBERG VCS Administration Manual

Working with SIP Text goes here
SIP settings are configured via:
•
VCS Configuration > Protocols > SIP >
Configuration.
You will be taken to the SIP page.
•
xConfiguration SIP
SIP mode
Determines whether or not the VCS will
provide SIP functionality (i.e. SIP Registrar and
SIP proxy services).
Registration expire delta
Specifies the period within which a SIP
endpoint must re-register to prevent its
registration expiring.
SIP registration proxy mode
Specifies how proxied registrations and invites
will be handled.
Off: Registration requests will not be proxied
(but will still be permitted locally if the VCS is
authoritative for that domain). Invite requests
with existing Route Sets will be rejected.
Proxy to known only: Registration requests will
be proxied, and invite requests will be proxied
only if the Route Set contains the URI(s) of
Neighbors
Proxy to any: Registration requests and invite
requests will always be proxied.
Save
Click here to save your changes.
Getting System
Introduction
Started Overview
D 14049.01
07.2007

Configuring SIP - Registrations, Protocols and Ports

System H.323 & SIP H.323 & SIP Registration
Configuration Configuration Configuration Control
Zones and Call
Neighbors Processing
36
TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
UDP mode
Determines whether or not incoming SIP calls
using the UDP protocol will be allowed.
The default is On .
UDP port
Specifies the listening port for incoming SIP
calls over UDP.
5060
The default is .
TCP mode
Determines whether or not incoming SIP calls
using the TCP protocol will be allowed.
The default is On .
TCP port
Specifies the listening port for incoming SIP
calls over TCP.
5060
The default is .
TLS mode
Determines whether or not incoming SIP calls
using the TLS protocol will be allowed.
The default is On .
TLS port
Specifies the listening port for incoming SIP
calls over TLS.
5061
The default is .
Firewall Bandwidth
Maintenance
Traversal Control
Appendices