Table of Contents
Advertisement
Grey Headline (continued)
Command reference - xConfiguration
xConfiguration
The
group of commands are used to
set and change individual items of configuration. Each
command is made up of a main element followed by
one or more sub-elements.
xConfiguration
The following pages list all the
commands currently available on the VCS.
To set a particular item of configuration, type the
command as shown. The valid values for each
command are indicated in the angle brackets following
each command; these are explained opposite.
To obtain information about the existing configuration
on the VCS:
•
xConfiguration
type
to return all current
configuration settings for the VCS.
xConfiguration <element>
•
type
to return all
current configuration for that particular element and
all its sub-elements.
xConfiguration <element> <sub-
•
type
element>
to return all current configuration for
that group of sub-elements.
To obtain information about using each of the
xConfiguration
commands:
•
xConfiguration ?
type
to return a list of all
xConfiguration
elements available under the
command.
•
xConfiguration ??
type
to return a list of all
xConfiguration
elements available under the
command, along with the valuespace, description
and default values for each.
xConfiguration <element> ?
•
type
available sub-elements, along with the valuespace,
description and default values for each.
•
xConfiguration <element>
type
<sub-element> ?
to return all available sub-
elements, along with the valuespace, description
and default values for each.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
The valid values for
this command are
one of the options
shown within the
angle brackets.
The valid value for
this command is an
integer. The minimum
and maximum values
are shown within the
angle brackets.
The valid value for
this command is a
string. The minimum
and maximum number
of characters is
shown after the S.
When issuing this
command, the string
must be typed in
double quotes.
to return all
Square brackets
indicate that you can
configure more than
one of this particular
item. Each item is
assigned an index
within the range
shown.
System
VCS
configuration
configuration
Overview
Zones and
Call
Bandwidth
neighbors
processing
control
192
TANDBERG
VIDEO COMMUNICATIONS SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
