TANDBERG Video Communication Server Administrator's Manual page 236

Grey Headline (continued)
Command reference - xCommand
OptionKeyDelete
Deletes a software option key from the VCS.
OptionKeyId(r): <1..64>
Specifies the ID of the software option to be deleted.
xCommand OptionKeyDelete OptionKeyId: 2
Example:
PipeAdd
Adds and configures a new pipe.
PipeName(r): <S: 1, 50>
Assigns a name to this pipe.
TotalMode: <Unlimited/Limited/NoBandwidth>
Determines whether or not this pipe is enforcing total bandwidth restrictions. NoBandwidth: no bandwidth available; no calls can be made using this pipe. Default: Unlimited.
Total: <1..100000000>
If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe. Default: 500000.
PerCallMode: <Unlimited/Limited/NoBandwidth>
Determines whether or not this pipe is limiting the bandwidth of individual calls. NoBandwidth: no bandwidth available; no calls can be made using this pipe. Default: Unlimited.
PerCall: <1..100000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call. Default: 1920.
xCommand PipeAdd PipeName: "512k ADSL" TotalMode: Limited Total: 512 PerCallMode: Limited PerCall: 128
Example:
PipeDelete
Deletes a pipe.
PipeId(r): <1..100>
The index of the pipe to be deleted.
xCommand PipeDelete PipeId: 2
Example:
RemoveRegistration
Removes a registration from the VCS.
Registration: <1..3750>
The index of the registration to be removed.
RegistrationSerialNumber: <S: 1, 255>
The serial number of the registration to be removed.
xCommand RemoveRegistration RegistrationSerialNumber: "a761c4bc-25c9-11b2-a37f-0010f30f521c"
Example:
Overview and
Introduction Getting started
status
D14049.05
February 2009
System VCS Zones and
configuration configuration neighbors
Call Bandwidth
processing control
236
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices