Self-Diagnosis Modes - Toshiba e-Studio3511 Service Handbook

Toshiba e-studio multifunctional digital color systems

Hide thumbs Also See for e-Studio3511:

Table of Contents

2.2 Self-diagnosis Modes

Control panel

Setting mode

List print mode

[9]+[START]+

[6]+[START]+

To enter the desired mode, turn ON the power while two digital keys designated to each mode (e.g. [0]

and [5]) are pressed simultaneously.

• Control panel check mode (01):

(LED lit/LCD blinking)

1. A mode can be canceled by [POWER] OFF/ON when the LED is lit and the LCD is blinking.

2. Button Check

Buttons with LED

Buttons without LED

Button on touch panel (Press to display the screen on the control panel at power-

All LEDs on the control panel are lit, and all

the LCD pixels blink.

Checks the status of input/output signals.

Outputs the test patterns.

Adjusts various items.

Sets various items.

Prints out the data lists of the codes 05 and

08, PM support mode and pixel counter.

Clears each counter.

Performs updating of the system firmware.

(Button check)

(Press to turn OFF the LED.)

(Press to display the message on the control panel.)

e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE

[POWER] OFF/ON

Table of Contents

E-studio4511