Toshiba e-Studio3511 Service Handbook page 142

Classifi-
Code
cation
Develop- Color auto-toner sensor/
864
ment sensor OFF output value
display at power ON
Develop- Color auto-toner sensor/
865
ment reference plate output value
display at power ON
Develop- Color auto-toner
866-0
ment sensor/abnormal
detection potential
866-1 difference setting
of reference plate
output
867 Develop- Color auto-toner control
ment environment and life light
amount correction setting
868 Develop- Color auto-toner adjustment
ment finishing range setting
869 Develop- Color auto-toner control
ment environment and life light
amount correction/correction
finishing range setting
Develop- Color auto-toner sensor/
870
ment setting of number of times of
error detection at light
amount correction
Develop- Color auto-toner control
871
ment environment and life light
amount correction/display of
number of times of reference
plate detection error
Develop- Color auto-toner control
872
ment environment and life light
amount correction/display of
number of times of light
amount control voltage
adjustment error
Develop- Color auto-toner
873-0
ment control/developer
873-1 initial output
setting
873-2
e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08)
Func-
Items
tion
ALL
(color)
ALL
(color)
Upper ALL
limit (color)
Lower ALL
limit (color)
ALL
(color)
ALL
(color)
ALL
(color)
ALL
(color)
ALL
(color)
ALL
(color)
ALL
Y
(color)
M ALL
(color)
ALL
C
(color)
2 - 122
Default
RAM
<Acceptable
value>
- Displays the sensor output value
M
<0-1023> when the sensor light source is OFF
at power ON.
- Displays the sensor output value with
M
<0-1023> the standard light amount for the
reference plate at power ON.
820 Sets the range for judging whether
M
<0-1023> the difference between the sensor
output when the sensor light source
205 M is OFF and the sensor output for the
<0-1023> reference plate is correct or not.
0 M Sets whether the sensor light amount
<0-1> is corrected or not depending on the
environment and life.
0: Correction 1: No correction
4 M Sets the difference from the target
<0-255> value for judging whether the color
auto-toner adjustment finishes
correctly or not.
5 M Sets the difference from the target
<0-255> value for judging whether the light
amount correction finishes correctly
or not.
3 Sets the number of times of
M
<0-255> continuous error detection before the
light amount correction abnormality is
displayed.
0 M Displays the number of times of the
<0-255> reference plate detection error for the
environment and life light amount
correction.
0 Displays the number of times of the
M
<0-255> light amount control voltage
adjustment error for the environment
and life light amount correction.
256 Sets the initial developer output
M
<0-1023> target value.
256 M
<0-1023>
256
M
<0-1023>
November 2003 © TOSHIBA TEC
Proce-
Contents
dure
2
2
4
4
1
1
1
1
2
2
4
4
4