Toshiba e-Studio3511 Service Handbook page 124

Classifi-
Code
cation
468-0 Paper Feeding retry
feeding number setting
468-1 (LCF)
470 Paper Paper size (305x457 mm)
feeding feeding/widthwise direction
471 Paper Paper size (Post card)
feeding feeding/widthwise direction
478 Laser Judged number of polygonal
motor rotation error (Normal
rotation)
479 Laser Judged number of polygonal
motor rotation error (At
acceleration/deceleration)
480 Paper Default setting of paper
feeding source
481 Paper Automatic change of paper
feeding source
482 Paper Feeding retry setting
feeding
483 Laser Pre-running rotation of
polygonal motor
e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08)
Func-
Items
tion
Plain ALL
paper
Others ALL
ALL
ALL
ALL
ALL
PPC
PPC
ALL
ALL
2 - 104
05/05
Default
RAM
<Acceptable
value>
5 M Sets the number of times of the
<0-5> feeding retry from the LCF.
5 M
<0-5>
457/305 M
<148-457/
105-305>
148/100 M * Post card is supported only for JPN
<148-432/ model.
100-297>
0 M Displays the error [CA10] when the
<0-1> set number of rotation error has been
detected.
0: 2 times 1: 12 times
0 M 0: Waiting time for polygonal motor
<0-1> rotation overshooting 0.6 sec.
1: Waiting time for polygonal motor
rotation overshooting 2.2 sec.
0 SYS 0: A4/LT 1: LCF
<0-5> 2: Upper drawer 3: Lower drawer
4: PFP upper drawer
5: PFP lower drawer
1 SYS Sets whether or not changing the
<0-2> drawer automatically to the other
drawer with the paper of the same
size when paper in the selected
drawer has run out.
0: OFF
1: ON (Changes to the drawer with
the same paper direction and size:
ex. A4 to A4)
2: ON (Changes to the drawer with
the same paper size. Paper with
the different direction is acceptable
as long as the size is the same:
ex., A4 to A4-R, LT-R to LT. "1" is
applied when the staple/hole-
punch is specified.)
0 M 0: ON 1: OFF
<0-1>
0 SYS Sets whether or not switching the
<0-2> polygonal motor from the standby
rotation to the normal rotation when
the original is set on the RADF or the
platen cover is opened.
0: Valid (when using RADF and the
original is set manually)
1: Invalid
2: Valid (when using RADF only)
November 2003 © TOSHIBA TEC
Proce-
Contents
dure
4
4
10
10
1
1
1
1
1
1