Options - Toshiba e-Studio3511 Service Handbook

1.3 Options

Platen cover
Reversing Automatic Document Feeder (RADF)
Drawer module
Paper Feed Pedestal (PFP)
Large Capacity Feeder (LCF)
Finisher (Hanging type)
Finisher (Console type)
Hole punch unit
Staple cartridge
Bridge kit
Key copy counter, key copy counter socket
Work table
Damp heater kit
FAX board
FAX board 2nd line
Expansion memory
Wireless LAN adapter
PCI slot
Scrambler board
Notes:
1. The bridge kit (KN-3511) is necessary for installation of the finisher (MJ-1022, MJ-1023 or
MJ-1024).
2. The finisher (MJ-1023 or MJ-1024) is necessary for installation of the hole punch unit
(MJ-6004N/E/F/S).
3. The PCI slot (GO-1030) is necessary for installation of the scrambler board (GP-1030).
1.4 Supplies
Drum
Toner bag
Toner cartridge (K)
Toner cartridge (Y)
Toner cartridge (M)
Toner cartridge (C)
Marked * : E, D, C and T
e-STUDIO3511/4511 SPECIFICATIONS
KA-3511PC
MR-3015
MY-1021
KD-1011
KD-1012 A4/LT
MJ-1022
MJ-1023, MJ-1024 (with saddle stitcher)
MJ-6004 N/E/F/S
STAPLE-1600 (for hanging type)
STAPLE-2000 (for console type)
STAPLE-600 (for saddle stitcher)
KN-3511
MU-8, MU-10
KK-3511
MF-3511
GD-1150
GD-1160
GC-1180
GN-1010
GO-1030
GP-1030
PS-OD3511
PS-TB3511
PS-ZT3511 *K, PS-ZT3511K
PS-ZT3511 *Y, PS-ZT3511Y
PS-ZT3511 *M, PS-ZT3511M
PS-ZT3511 *C, PS-ZT3511C
1 - 6 November 2003 © TOSHIBA TEC