Toshiba e-Studio3511 Service Handbook page 194

• In case of single-color adjustment, press the [ENTER] button to store the adjustment results in
memory when the control value is displayed. In case of multiple-color adjustment, it is automati-
cally proceeded to the adjustment of next color. When the adjustments of all colors have finished
and [ENTER] is lit, press [ENTER] button to store the adjustment results in memory.
(6) Standard of adjustment value range
(A): Adjustment reference voltages (V)
Humidity(%)
29.9 or below
30.0-44.9
45.0-59.9
60.0-74.9
75.0 or above
Note:
Since the adjustments for "Y", "M" and "C" are controlled by the light sensor, the humidity
correction is not performed.
(B): Current sensor voltages (V)
Humidity(%)
29.9 or below
30.0-44.9
45.0-59.9
60.0-74.9
75.0 or above
Note:
Since the adjustments for "Y", "M" and "C" are controlled by the light sensor, the humidity
correction is not performed.
(7) Turn the power OFF.
(8) Install the toner cartridges.
e-STUDIO3511/4511 ADJUSTMENT
K Y
2.47 1.25
2.49
2.50
2.69
2.86
K Y
2.37-2.57 1.15-1.35
2.39-2.59
2.40-2.60
2.59-2.79
2.76-2.96
3 - 4
M
1.25 1.25
M
1.15-1.35 1.15-1.35
November 2003 © TOSHIBA TEC
C
C