Toshiba e-Studio3511 Service Handbook page 42

• Test mode (03): Refer to "2.2.1. Input check (test mode 03)" and "2.2.2. Output check (test mode 03)".
• Test print mode (04): Refer to "2.2.3. Test print mode (04)".
• Adjustment mode (05): Refer to "2.2.4. Adjustment mode (05)".
• Setting mode (08): Refer to "2.2.5. Setting mode (08)".
• List print mode (9S): The procedure varies depending on the code.
[9] [START] (Code)
[POWER]
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
104: Stored information of pixel counter (toner cartridge reference)
105: Stored information of pixel counter (service technician reference)
106: Error history
• PM support mode (6S):
[6][START]
[POWER]
• Firmware update mode (89): Refer to "6. FIRMWARE UPDATING".
Normal
Control panel
Warming up
check mode
Ready
[POWER]
OFF
*1
To user
*1 Turn OFF the power after using the self-diagnosis mode, and leave the equipment to the user.
e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE
[START] [Digital keys]
Key in the first
code to be printed
(Code)
2: PM Support Screen
[POWER]
ON
[0][1] [0][3] [0][4]
Test print
Test mode
mode
State transition diagram of self-diagnosis modes
[START] [Digital keys]
Key in the last
code to be printed
[START]
(Operation started)
[0][5] [0][8]
Adjustment
Setting
mode
mode
2 - 22
[START] [POWER] OFF/ON
List starts to
be printed
[POWER] OFF/ON
(Exit)
[9][START] [6][START]
List print PM support
update mode
mode mode
November 2003 © TOSHIBA TEC
(Exit)
[8][9]
Firmware