Toshiba e-Studio3511 Service Handbook page 101

Classifi-
Code
cation
247 Paper Memory 2
feeding Paper size (bypass feeding/
non-standard type)
feeding/widthwise direction
248 Paper Memory 3
feeding Paper size (bypass feeding/
non-standard type)
feeding/widthwise direction
249 Paper Memory 4
feeding Paper size (bypass feeding/
non-standard type)
feeding/widthwise direction
250 Mainte- Service technician
nance telephone number
251 Mainte- Setting value of PM counter
nance
252 Mainte- Current value of PM counter
nance Display/0 clearing
253 Mainte- Error history display
nance
LT ↔ A4/LD ↔ A3
254 Paper
feeding
255 Paper PFP/LCF installation
feeding
256 Paper Paper size setting /LCF
feeding
257 Counter Counter copy
258 Mainte- FSMS acceptance
nance
259 Network Storage period at trail and
private
November 2003 © TOSHIBA TEC
Setting mode (08)
Default
Func-
Items
<Acceptable
tion
value>
ALL 148/100
<148-432/
100-297>
ALL 148/100
<148-432/
100-297>
ALL 148/100
<148-432/
100-297>
ALL
< 32 digits>
ALL Refer to
content
<8 digits>
ALL
<8 digits>
ALL
PRT
<0-1>
ALL
<0-4>
ALL EUR:A4
UC:LT
JPN:A4
ALL
<1-2>
ALL
<0-2>
PRT
<0-30>
2 - 81
04/10
RAM Contents
SYS Registers the paper size of bypass
feed (non-standard type) into
[MEMORY 2].
SYS Registers the paper size of bypass
feed (non-standard type) into
[MEMORY 3].
SYS Registers the paper size of bypass
feed (non-standard type) into
[MEMORY 4].
0 SYS A telephone number can be entered
up to 32 digits. Use the [MONITOR/
PAUSE] button to enter a hyphen(-).
M <Default>
e-STUDIO3511
UC, EUR: 120000 JPN: 0
e-STUDIO4511
UC, EUR: 150000 JPN: 0
0 M Counts up when the registration
sensor is ON.
- SYS Displays the latest 20 errors data
0 SYS Sets whether the data is printed on
the different but similar size paper or
not when the paper of corresponding
size is not available.
0: Valid (The data is printed on A4/A3
when LT/LD is selected or vice
versa.)
1: Invalid (The message to use the
selected paper size is displayed.)
0 M 0: Automatic
1: PFP single-drawer type installed
2: PFP dual-drawer type installed
3: LCF installed
4: Not installed
M Press the icon on the LCD to select
the size.
- - 1: Electrical counter -> Backup counter
2: Backup counter -> Electrical counter
( Page 2-153)
1 SYS Sets whether the FSMS connection
is accepted or not.
0: Prohibited
1: Accepted (serial connection only)
2: Accepted (both serial and USB
connections)
14 SYS 0: No limits 1 to 30: 1 to 30 days
e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
10
10
10
11
1
1
2
1
1
9
-
1
1