Releasing The Stack Tray Guide Lever Fixing Plate - Toshiba e-Studio3511 Service Handbook

Toshiba e-studio multifunctional digital color systems

Hide thumbs Also See for e-Studio3511:

Table of Contents

3.13.5 Releasing the stack tray guide lever fixing plate

(1) Remove the right inner cover and the rear

(2) Remove the finisher control PC board, PC

board bracket and sensor PC board.

(3) Remove the stack tray.

(4) Remove the stack tray drive unit.

(5) Place the stack tray guide lever fixing plate

so that it is in view through the hole in the

side plate (front, rear). Then remove the

fixing screw. (Perform the same for the front

and the rear.)

When removing the mounting screw, be sure to

hold the stack tray guide lever up from below.

e-STUDIO3511/4511 ADJUSTMENT

Stack tray guide lever

fixing plate

Table of Contents

E-studio4511