Gamma Balance Adjustment - Toshiba e-Studio3511 Service Handbook

Toshiba e-studio multifunctional digital color systems

Hide thumbs Also See for e-Studio3511:

Table of Contents

3.5.4 Gamma balance adjustment

The density adjustment at the Black Mode is performed by selecting its density area from the

following: low density, medium density and high density.

Original mode

Make a test copy and compare the image obtained with the current settings; if necessary, make

adjustment using the following procedure.

Be sure that this adjustment be made after performing "3.5.1 Automatic gamma adjustment".

Procedure is same as that of "3.5.3 Color balance adjustment".

Medium density

The larger the value is, the density

of the item to be adjusted becomes

Acceptable values: 0 to 255.

(Default: 128)

High density

e-STUDIO3511/4511 ADJUSTMENT

Table of Contents

E-studio4511