Toshiba e-Studio3511 Service Handbook page 237

(2) Adjusting carriages-1 and -2 positions
a. Move the carriage-2 toward the exit side.
b. Loosen the screws fixing the front side pulley bracket, make the sections A and B of the
carriage-2 touch with the inside of the exit side frame and screw them up.
[Rear]
c. Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit
frame and screw up the front/rear side of the bracket to fix it.
Note:
Make sure that the sections A and B of the carriage-2 touch with the exit side frame.
[Rear]
Bracket
November 2003 © TOSHIBA TEC
Carriage-2
B
Fig. 3-902
Carriage-1
D
Fig. 3-903
3 - 47
Pulley bracket
Exit side frame
Enlarged view of carriage
A
Exit side frame
Bracket
Enlarged view of carriage
C
e-STUDIO3511/4511 ADJUSTMENT
[Front]
[Front]