Table of Contents
Advertisement
31. Cleaning Blade, Metering Blade, and Oil Supply Pad Replacement
1.
Remove the fusing left cover.
ment".)
Disconnect the oil tube [A] and remove the the oil supply unit [B] (2 Al-
2.
len screws).
3.
Unhook the pressure springs [C], rotate the cleaning blade assembly [D]
to the vertical position, and remove it.
4.
Remove the oil supply pad assembly [E] (2 screws).
5.
Unhook the pressure springs [F]; rotate the metering blade assembly [G]
to the vertical position, and remove it.
(Refer to "Hot Roller Stripper Replace-
3-45
12 July '86
Advertisement
Chapters
Table of Contents
