Ricoh FT7060 Field Service Manual page 22

25. Remove the lower
connector [A] on the
26. Close the front doors and plug in the power cord. Turn on the main
switch [B].
While waiting for the fusing unit to warm up (about
27.
the copy tray [C].
28. Load paper in the upper and lower paper trays.
29. Perform drum conditioning for 15 minutes as follows:
a) Place a white sheet of A3 or 11" x 17" paper on the exposure glass
and lower the ADF transport unit.
b) Use SP 1-3 (Free Run) for
Insert the sponge cushions
30.
front and rear.
left cover (2 screws), and m o v e the j u m p e r
timer board from JPS-102 to JPS-101.
drum conditioning.
under the base plate of the copier at the
[D]
1-13
12 July '86
7 minutes), install