Ricoh FT7060 Field Service Manual page 199

12 July '86
5. Position the paper conveyor drive unit [A] (2 positioning pins), and
secure it (3 screws: M4 w/washer x 6mm).
6. Install the two gears: 36T [B] and 31T [C].
7. Remove the cover plate [D] (2 screws).
8. Couple the 3 connectors [E] of the option tray cables with those of the
copier harness; 6P, 12P, and 15P. Secure the ground wire [F] (1 ground
screw).
9. Install the harness bracket [G] (2 screws).
7-4