Table of Contents
Advertisement
10.
Open the top unit [A], and remove the development unit
screw).
11.
Position the paper conveyor unit [C] (2 positioning pins and
secure it (2 screws: M4 x 6mm).
12.
Reinstall the development unit cover.
13.
Stick the cushion [D] on the front top of the power supply unit shielding
box.
14.
Install the paper entrance guide [E] (2 screws: M4 x 6mm).
15.
Confirm that the paper conveyor unit opens and closes smoothly. Close
the top unit.
16.
Reinstall the lower rear cover and the lower left cover.
7-5
12 July '86
cover [B] (1
1 hook), and
Advertisement
Chapters
Table of Contents
