Table of Contents
Advertisement
12 July '86
6.
Push the pick-up rollers to the rear and remove the four pins.
7.
Remove the cam [H], one-turn disk [I], first pick-up roller drive gear [J],
and idle gears [K].
8.
Push the second pick-up roller [L] to the front, and remove the second
pick-up roller drive gear [M].
9.
Lift the rear end of the feed-in unit, and open the pressure unit.
Remove the E-ring and the pin securing the entrance mylar pressure cam
[N]. (Do not lose the pin.)
10.
Remove the pick-up rollers and the entrance mylar pressure cam.
Be careful not to lose the pins.
5-8
Advertisement
Chapters
Table of Contents
