Ricoh FT7060 Field Service Manual page 137

12 July '86
8-2 Automatic Paper Selection (APS)
<Function>
Automatically enables the
the DF feed-in unit.
<Operation> The machine automatically selects the copy paper
8-3 Side Erase Margin Off (FULL)
<Function>
8-4 Clear Non-volatile RAM (CRAM)
9-2 Paper Size Change (SIZE)
<Function>
After using CRAM, the power should be turned off and
then on again.
ses to default values as follows.
SP 20
SP 21
SP 24
SP 25
SP 28
SP 31 to 34
All other SP addresses stay as they were after
CRAM.
size after detecting the size of the first original.
The size of subsequent originals is not checked.
This sets the machine to copy the full
The width of the side erase is shifted
one segment and trailing edge erase
Leading edge erase remains unchanged.
This mode is used together with SP mode 6-4 to clear
the RAM.
Programs the 115V/60Hz machine to use 10" x 14" size
paper as a standard paper size, rather than 8½" x 14".
3-92
This will set some of the SP addres-
==> 60 seconds
==> 999 copies
==> Infinity
==> Reverts to the date stored in
the EPROM
==> 000
==> Position 8
APS mode when originals are set in
image width.
outwards by
is delayed.