Ricoh FT7060 Field Service Manual page 246

12 July '86
1) The Please Wait condition frequently occurs
copy run, especially in the morning.
Check if the hot roller temperature is within
Ready: 182°C
Fusing Lamp ON: 182°C
Y N
Adjust temperature using SP 34.
Set SP 4-2.
If the problem
fluctuation of
Y N
Set SP 3-3 and the Weekly Timer so that the machine has
idled for 20 minutes prior to operation.
The use of constant voltage transformer may help.
OFF: 185°C
is still not solved, then check if the voltage
the mains is greater than 10%.
8-34
after a continuous
specifications