Ricoh FT7060 Field Service Manual page 25

12 July '86
7. A3 / 11" x 17" Counter Installation
Open the left door.
1.
2. Remove the development unit cover [A] (1 screw) and the jam indicator
cover [B] (3 screws).
3. Remove the jam indicator bracket [C] (2 screws).
Disconnect the dummy connector from the A3 / 11" x 17" counter connec-
4.
tor [D].
5. Set the A3 / 11" x 17" counter [E] through the jam indicator bracket as
shown.
6. Connect the A3 / 11" x 17" counter connector.
7. Reassemble.
8. Set SP 4-4 (A3 / 11" x 17" counter).
9. Check the counter operation by making an A3 / 11" x 17" copy.
1-16