Table of Contents
Advertisement
15.
Connect the fiber optic cables [A] to the cable terminals [B] on the
sorter main board.
CAUTION: When docking the sorter to the copier, open the copier to prevent damage to the
16.
Dock the sorter with the copier. Make sure the docking pins [C] are seated
firmly in the notches [D] in the copier frame. Close the copier top
unit.
17.
Insert the leveling shoes [E] under the sorter feet [F]; then, level the
sorter and align it with the copier by screwing down the feet.
18.
Install the fixing bracket
19.
Check the sorter operation.
20.
Complete the N.E.C.R.
sorter entrance guide plate.
[G]
(4 screws:
x 6mm).
M4
6-5
12 July '86
Advertisement
Chapters
Table of Contents
