Mounting The Camera's Outer Shell - Mobotix D12 Manuals

D12 Camera Manual Part 1
2.13.3 Mounting the Dome and the Camera's Outer Shell
Once the wall mount and the camera have been mounted, it's time to mount the
dome:
• Take a cotton cloth and mount the dome onto
the camera by turning it in clockwise direc-
tion. This will prevent you from accidentally
repositioning the lenses through the rest of
the mounting process.
Important: Position the mark of the dome
pointing towards the camera's PIR sensor and
gently seat the dome into the threads. This
will prevent misaligning the threads of the
dome!
Note: The camera is delivered with an addi-
tional tinted dome with reduced transparency!
Next, install the camera's outer shell:
• Only mount the outer shell if you have finished setting the lenses' focus and
mounted the camera dome.
• Hold the outer shell so that the round hole of the shell is positioned over the
PIR sensor of the camera. Gently press the shell into the shell's seats in the
camera housing.
The MOBOTIX D12D-Outdoor is only weatherproof if the camera hous-
ing has been mounted tightly to the bottom plate and both the camera
dome and the outer shell are properly seated.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Caution
69
/124
Lock ring secures lenses
against vibrations
Lenses are adjusted
manually
Tighten the dome by turn-
ing clockwise