Determining The Position Of The Camera On The Bottom Plate - Mobotix D12 Manuals

D12 Camera Manual Part 1

2.12.3 Determining the Position of the Camera on the Bottom Plate

Once the outdoor wall mount has been mounted to the wall or pole, the camera
can be mounted to the underside of the bottom plate (item 14). The bottom plate
closes off the outdoor wall mount from below and also holds the camera.
The upper side of the bottom plate has 24 holes for the M4 stainless steel hex
nuts (item 20); it is thus possible to mount the camera in increments of 15 degrees.
In order to facilitate the mounting process, all holes have numbers from 1 to 8.
Three standard positions are identified as described below:
• PIR sensor of the camera looks straight ahead: Use
the holes marked by the number
nuts (item 20).
• PIR sensor of the camera looks to the right: Use the
holes marked by the number
(item 20).
• PIR sensor of the camera looks to the left: Use the
holes marked by the number
(item 20).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
1 for the M4 hex
3 for the M4 hex nuts
7 for the M4 hex nuts
65
/124
The bottom plate closes
off the outdoor wall
mount from below and also
holds the camera
PIR looking straight
ahead: 1
PIR looking to the right: 3
PIR looking to the left: 7