Mobotix D12 Manuals page 85

D12 Camera Manual Part 1
Outdoor Wall Mount (MX-WH-Dome)
When mounted to the Outdoor Wall Mount, the
D12 can be used outside for enhanced outdoor sur-
veillance. When mounted to the outdoor wall
mount, the MOBOTIX D12 reaches protection class
IP65 (absolutely dustproof, resistant against water
jets). Operating temperatures may vary between -
30°C and +60°C (-22°F to 140°F), making it the ideal
camera for the most demanding weather situations.
Corner and Pole Mount (MX-MH-Dome-ESWS)
If you are intending to mount the camera to the cor-
ner of a building or a pole, you should consider us-
ing the Corner and Pole Mount together with the
Outdoor Wall Mount. This Corner and Pole Mount is
made of 3 mm powder-coated stainless steel
(white) and has been designed specifically for out-
door use. The supplied stainless steel straps allow
attaching the mount to poles with diameters be-
tween 60 and 180 mm (2.4 to 7.1 in); see section
2.11, Mounting the Corner and Pole Mount .
MOBOTIX Cam-IO (MX-CAM-IO)
This installation module for MOBOTIX cameras fea-
tures numerous connectors for external devices. It
thus expands the scope of camera applications
when adding external sensors using its two signal
inputs. On the other hand, it also allows controlling
other devices (two signal outputs, Line In/Out for
audio signals) and serves as power supply of the
camera.
For additional information on the MOBOTIX Cam-IO,
see section 3.7.2, MOBOTIX Cam-IO : Expansion
Module for Easy Installation .
Split cable for ISDN-only power supply
If only ISDN is available for the camera and only one cable should be used for con-
necting the camera, you will need to inject power into the 8-wire cable using either
a power supply and the Network Power Adapter or an MX-NPR-4/8/20.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
83
/124
Outdoor Wall Mount from
sturdy PBT 30GF
Corner and Pole Mount:
Outdoor quality made of
3 mm stainless steel
Expansion box with vari-
ous possibilities for at-
taching external devices
and sensors
Power injection into one
cable when using only
ISDN