Mobotix D12 Manuals page 5

D12 Camera Manual Part 1
2.17.2 Cleaning the Lenses
2.18 Wiring, Fire Prevention, Lightning and Surge Protection
2.18.1 Wiring
2.18.2 Fire Prevention
2.18.3 Lightning and Surge Protection
2.19 Optional Accessories
3 OPERATING THE CAMERA
3.1 General Procedure
3.1.1 Establishing the Power Supply of the Camera
3.1.2 Connecting the Camera
3.2 Overview of the Configuration Settings
3.3 Connecting the Camera
3.3.1 Ethernet: Power Supply Using a Network Power Adapter (MX PoE)
3.3.2 Ethernet: Power Supply Using a Network Power Rack (MX PoE)
3.3.3 Ethernet: Power Supply Using PoE Products (Power over Ethernet)
3.3.4 ISDN: Power Supply Using a Network Power Adapter
3.3.5 ISDN: Directly Supplying Power Using the External Power Supply
3.3.6 Ethernet and ISDN
3.3.7 Camera Startup Sequence
3.4 The First Image from the Camera
3.4.1 Preparing the Ethernet Connection
3.4.2 Preparing the ISDN Connection
3.4.3 Simultaneously Using ISDN and Ethernet Connections (Gateway)
3.4.4 The First Image in the Browser
3.4.5 Additional Information
3.4.6 Camera Screens in the Browser
3.4.7 Access Using Zeroconf/Bonjour
3.4.8 The First Image in MxControlCenter (MxCC)
3.5 Starting the Camera With an Automatic IP Address (DHCP)
3.6 Starting the Camera Using the Factory IP Address
3.7 Connecting External Devices and Sensors: MX Interface Connector
and MOBOTIX Cam-IO
3.7.1 MX Interface Connector for Direct Connections
3.7.2 MOBOTIX Cam-IO: Expansion Module for Easy Installation
3.8 Signal Input/Output (RS232 Interface)
3.8.1 Signal Input
3.8.2 Signal Output
3.9 D12 Drilling Templates
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
3
/124
80
80
80
81
81
82
84
84
84
84
86
88
88
89
90
91
92
92
93
94
94
96
96
97
98
99
100
104
110
111
112
112
113
114
114
115
116