Installing The Lens Units (D12D Standard) - Mobotix D12 Manuals

42
/124
RGB
B/W
Designation of the lens
units
Possible image sensor
combinations for the MO-
BOTIX D12D (Standard)
D12 Camera Manual Part 1

2.5 Installing the Lens Units (D12D Standard)

The standard models of the MOBOTIX D12 are delivered with a pre-mounted dome.
Lens units (lens mount, image sensor and lens) are delivered separately and
need to be installed as described in the following:
The ribbon cables for connecting the image sensors are marked by the letters
(left) and R (right). Depending on the type of sensor used, the sensors (mounted on
the lens units) are marked either by the
(RGB, color).
The following combinations of ribbon cables (L, R) and sensors (color,
white) are possible:
Image Sensor Combination
Color/Color
Color/Black & White
Black & White/Black & White
Make sure that you only use the combinations of sensors and ribbon
cables listed in the table!
When setting up the camera, the installed combination of image sen-
sors has to be set in the camera's user interface. This is done either
automatically in the
the Admin Menu > Image Sensor Configuration dialog (see section
3.2, Overview of the Configuration Settings ).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
icon (BW, black & white) or the
Ribbon cable L
Notes
Quick Installation wizard or manually by opening
www.mobotix.com • sales@mobotix.com
L
icon
black &
Ribbon cable R