Mobotix D12 Manuals page 73

D12 Camera Manual Part 1
(2) Remove the cable cover
Remove the 4 mm Allen screws of the cable
cover and remove the cover.
Note: If the cable
cover cannot be re-
moved by hand, take a
screwdriver to lift it out
of its seat. Insert the
screwdriver into the
grooves shown below
and gently lift the cable cover.
(3) Remove the Ethernet and ISDN cables
Remove the cables one by one by gently
pressing down the lock and pulling each ca-
ble out of its socket. Now take the cables out
of the cable guides at the bottom of the hous-
ing and remove them through the appropriate
holes in the housing. Take care to avoid any
damage to the cable guides at the bottom
of the camera housing (see figure ).
(4) Remove the dome
Take a cotton cloth and remove the transpar-
ent dome by turning it in counter-clockwise
direction.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
71
/124
For security reasons, the
outer shell can only be re-
moved using the supplied
custom tool