Mounting The Camera With Wall Mount; Varioflex Wall Mount - Mobotix M25-Body Manual

Mounting the Camera with Wall Mount

2.2 Mounting the Camera with Wall Mount
The M25M is a versatile camera designed for use in indoor and outdoor applications. The
camera must always be installed with the VarioFlex mount, which has been prepared at
the factory for wall mounting and allows the cabling to be concealed. The best camera
position for the selected lens must be found before mounting the camera to the wall (see
Section 2.1.1, «Mounting Options: Wall, Ceiling, Pole» and Section 2.1.2, «Mounting with
Hemispheric Lens L12» ). Once the camera has been mounted to the wall, you can fine-tune
its position. Please read the notes on protecting the camera against condensation
(see Section 3.6.1 ).

2.2.1 VarioFlex Wall Mount

Using the VarioFlex Wall Mount, the camera can be precisely panned, both horizontally
and vertically, to suit the area that is to be monitored.
When mounted to a wall, the camera can be turned or tilted as follows:
• horizontally: 180°
• vertically: 110°
-90°
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
+20°
180°
63
/136
See Section 3.6.1,
«Protecting the Camera
Against Condensation»
Turning/tilting mounted
to wall:
• horizontally: 180°
• vertically: 110°