Preparatory Steps; Mounting To A Ceiling - Mobotix D12 Manuals

30
/124
Caution: The screws
should be at least 15 mm
(5/8") longer than the
dowels
D12 Camera Manual Part 1

2.3 Preparatory Steps

Before mounting the MOBOTIX D12 and (if required) the Outdoor Wall Mount (see
sections 2.9 and 2.12), the following questions should be solved:
• Which connections
• Where should the camera be mounted and which area should the
sor cover?
• How will you provide the camera
work Power Adapter/Rack, external power supply)?
• How will the connections be provided
ISDN, RS232, power supply)?
• Which other mounting options
Make sure that you follow the instructions for mounting the camera to differ-
ent surfaces (see section 2.16).
In order to solve these and other questions, you should consult
shop.mobotix.com for more information on the MOBOTIX D12D,
the D12D-Outdoor, D12D-180° and the D12M-CS as well as the avail-
able accessories.

2.3.1 Mounting to a Ceiling

When mounting the camera to a ceiling, make sure that the PIR sensor
points into the direction where it is most useful. The PIR sensor
reaches about 10 meters (33 ft) and has a field of view of ±15°. The
cable outlet should be positioned so that it is directly behind the
center of the camera housing.
1.6 m/5.3 ft
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
should the camera use (network/ISDN/RS232)?
power supply
from within the building
(e.g. corner/pole mount) are required?
Note
3 m/10 ft
www.mobotix.com • sales@mobotix.com
PIR sen-
(PoE switch, inline using Net-
(network,