Table of Contents
Advertisement
D12 Camera Manual Part 1
After first booting a new MOBOTIX camera or after resetting to factory
defaults, accessing the Administration menu (Admin Menu button) will
automatically start the
configure the most important camera parameters in a step-by-step
manner. If you have completed the Quick Installation wizard at least
once, the standard Administration menu will open when you click on
the Admin Menu button.
The configuration follows these steps:
1) Establish the first connection (Ethernet or ISDN).
2) Set the parameters for the desired connection type (Ethernet/ISDN) using the
Quick Installation wizard.
3) Set the event control (events, actions and messages); see chapter 7, Events,
Actions and Messages , in the Software Manual .
4) Set the storage parameters (FTP, internal and external ring buffer storage).
5) Store the configuration in the camera's permanent storage (flash).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Note
Quick Installation
wizard. This is where you
85
/124
Always use
Quick Instal-
lation
for initial configu-
ration
Hide quick links:
Advertisement
Table of Contents
