Electronic Control Unit (Ecu) - KYMCO People GT 300i Service Manual

13. FUEL INJECTION SYSTEM
ELECTRIC CONTROL UNIT
(ECU)
REMOVAL/INSTALLATION
● Do not disconnect or connect the ECU
connector during the ignition switch
"ON"; it may cause the ECU damaged.
● The throttle position sensor (TPS) and
idle air bypass valve (ISC) have to be
reset when throttle body, MAP, TPS,
ISC or ECU has been reinstalled.
Disconnect the ECU connector and remove
the ECU from the frame.
Installation is in the reverse order of the
removal.
Horn
Ignition Switch
ECU
13-17
Winker Relay Tilt Switch
People GT 300i
ECU Relay
Lo Beam Relay
Hi Beam Relay
Fuel Pump Relay