Using The Knee Lifter - Brother 882-W33 Operation Manual

e
Rotate the fabric, and then press the "Start/
Stop" button.
 The presser foot is automatically lowered, and
sewing continues.

Using the Knee Lifter

Using the knee lifter, you can raise and lower the
presser foot with your knee, leaving both hands
free to handle the fabric.
a
Change the operating position of the knee
lifter handle before inserting into the
machine.
Slide up the knee lifter handle slightly and
rotate it while releasing pressure so handle
will click into position.
* The knee lifter can be adjusted to three different
angles.
a Knee lifter handle
 Rotate knee lifter handle till it clicks into the
selected position that is most comfortable for you.
b
Align the tabs on the knee lifter with the
notches in the knee lifter slot on the front of
the machine. Insert the knee lifter bar as far
as possible.
IMPORTANT
• Only change position of the knee lifter handle
when knee lifter is not on the machine,
otherwise the knee lifter may damage the
mounting slot on front of the machine.
Memo
• If the knee lifter bar is not pushed into the
mounting slot as far as possible, it may come
out during use.
c
Use your knee to move the knee lifter bar to
the right in order to raise the presser foot.
To lower the presser foot, use your knee to
move the knee lifter bar slightly toward the
right, then release it.
Note
• Be sure to keep your knee away from the knee
lifter during sewing.
USEFUL FUNCTIONS
77
2