Adjusting The Needle Drop Position With The Guideline Marker (For Models Equipped With The Guideline Marker); Adjusting The Guideline Marker Position; Adjusting The Brightness Of The Guideline Marker - Brother DreamWeaver„ VQ3000 Operation Manual

USEFUL FUNCTIONS
Adjusting the Needle Drop
Position with the Guideline
Marker (For models equipped
with the guideline marker)
The red guideline marker indicates the sewing
position on the fabric.
You can adjust the sewing position by moving the
guideline marker while checking the guideline
marker on the fabric.
CAUTION
• The guideline marker is a laser; therefore, do
not stare at the laser light directly. Otherwise
it may cause blindness.
a
Press to display the guideline marker.
→ The guideline marker scale appears.
* Depending on the setting of "Initial Position" in the
settings screen, the intial needle drop position is
scaled as either 0.0 mm or 3.5 mm.
b
Use or to move the needle drop
position.
→ Adjust the position from 10.5 mm (3/8 inch) to the
right of the left needle to -3.5 mm (-1/8 inch) to the
left of the left needle.
S-14
c
Press again to stop using the guideline
marker.
■ Adjusting the Guideline Marker
Position
If the guideline marker indicates the position
incorrectly in the center needle position, adjust the
initial position in the settings screen.
a
Press to display "Guideline Marker
Adjust" in the settings screen.
b
Display settings screen.
c
Press .
→ The "Guideline Marker Adjust" screen appears.
d
Use or to adjust the guideline
marker position.
a
a Press to move the guideline marker to the left
b Press to move the guideline marker to the right
e
Press twice to return to the original
screen.
■ Adjusting the Brightness of the
Guideline Marker
a
Follow steps from
"Guideline Marker Adjust" screen.
b
a c
to to display the