Sewing Split Embroidery Patterns - Brother 882-D80 Operation Manual

f
Reattach the embroidery frame to the
embroidery unit, and embroider the satin
stitch pattern to create an appliqué.

Sewing Split Embroidery Patterns

Split embroidery patterns created with PE-DESIGN
Ver.7 or later, or PE-DESIGN NEXT can be sewn.
With split embroidery patterns, embroidery
designs larger than the embroidery hoop are
divided into multiple sections, which combine to
create a single pattern after each section is sewn.
For details on creating split embroidery patterns
and for more detailed sewing instructions, refer to
the Instruction manual included with PE-DESIGN
Ver.7 or later, or PE-DESIGN NEXT.
The following procedure describes how to read
the split embroidery pattern shown below from
USB media and embroider it.
EMBROIDERY APPLICATIONS
a
Connect to the machine the media
containing the created split embroidery
pattern, and then select the split
embroidery pattern to be embroidered.
* For details on recalling patterns, refer to "Selecting
Patterns from Embroidery Cards" on page E-7,
"Recalling from USB Media" on page E-49, or
"Recalling from the Computer" on page E-50.
→ A screen appears so that a section of the split
embroidery pattern can be selected.
b
Select section
* Select the sections in alphabetical order.
* A maximum of 12 sections can be displayed in one
page. If there are 13 or more sections in the pattern,
press or to display the previous or next
page.
to be embroidered.
Embroidering E-53
E
1