Table of Contents
Advertisement
LCD Operation
Viewing the LCD
An opening movie may be displayed when the power is
turned on.
When the opening movie is displayed, the screen will be
displayed if you touch the LCD with your finger.
Touch a key with your finger to select the embroidery pattern,
to select a machine function, or to select an operation
indicated on the key.
4
1 Embroidery pattern category (page 30)
2 Wireless LAN key
Set the wireless LAN connection. (page 15)
If
is displayed, update the software. (page 56)
3 Pattern retrieve key (page 43)
4 Touch this key to position the embroidery unit for
storage.
Settings screen
Touch
to change the default machine settings. Touch
or
, after you changed necessary settings.
Memo
• The latest version of software is installed in your
machine. Check with your local authorized Brother
dealer or at https://s.brother/cpjaq/ for available
updates.
• You can save the current settings screen image in
a USB flash drive by touching
flash drive is inserted into the USB port. The files
are saved in a folder labeled "bPocket".
■ Embroidery settings
4
5
6
1
3
2
when the USB
1
2
3
7
1 Select the embroidery frame to be used.
2 Select the center mark and grid lines that are displayed.
3 When set to [ON], you can only select the embroidery
pattern corresponding to the embroidery frame size that
1
you selected in
. (page 31)
4 Select the thread color display on the embroidery
screen; thread number, color name. (page 34)
5 Select the thread brand. (page 34)
6 Select the display units (mm/inch).
7 Select the size of pattern thumbnails.
8 Select the color of the background for the embroidery
display area.
9 Select the color of the background for the thumbnail
area.
■ General settings
1
2
3
4
5
6
7
8
9
0
1 Select the needle stop position (the needle position for
when the machine is not being operated) to be up or
down.
2 Select whether to hear the beep operation sound.
3 Select whether to display the opening screen when the
machine is turned on.
4 Select the display language.
5 Select whether to turn work area light on or off.
6 Select the level of the input sensitivity for operation keys.
(page 14)
7 Display the service count which is a reminder to take
your machine in for regular servicing. (Contact your
authorized Brother dealer for details.)
8 Display the total number of stitches embroidered on this
machine.
9 The [No.] is the internal machine number for your
machine.
0 Display the program version installed on your machine.
LCD Operation
8
1
9
13
Advertisement
Table of Contents
