Hot/Warm Phone - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.7.2 Hot/Warm Phone

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
If the phone is configured as hot phone, the number specified in Hot warm desti-
nation is dialed immediately when the user goes off-hook. For this purpose, Hot
warm phone must be set to Hot phone. If set to Warm phone, the specified desti-
nation number is dialed after a delay which is defined in Initial digit timer
(seconds) (for details, see Initial Digit Timer). During the delay period, the user
can dial a number which will be used instead of the hot/warm destination. In
addition, the user will be provided with a dial tone during the delay period. With
the setting No action, hot phone or warm phone functionality is disabled.
Administration via WBM
System > Features > Configuration
Administration
Feature Configuration
105