Ip Address - Manual Configuration; How To Manually Configure The Phone´s Ip Address - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
IP Network Parameters

3.3.4 IP Address - Manual Configuration

3.3.4.1 How to Manually Configure the Phone´s IP Address
Prerequisites
54
Set DHCPv6 Enabled to selected (the default setting is Enabled). Afterwards,
click Submit.
Administration via Local Phone - IPv6
|
--- Admin
|--- Network
|--- IPv6 configuration
Related Topics
Related Topics
• If not provided by DHCP dynamically, the phone's IP address and subnet
mask must be specified manually.
INFO: IP addresses can be entered in the following formats:
– Decimal format. Example: 11.22.33.44 or 255.255.255.0 (no leading
zeroes).
– Octal format. Example: 011.022.033.044 (leading zeroes must be used
with every address block)
– Hexadecimal format. Example: 0x11.0x22.0x33.0x44 (prefix 0x must be
used with every address block)
• By default, IP configuration by DHCP and LLDP-MED is enabled. For manual
IP configuration, please proceed as follows:
Administration via WBM
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013