Siemens A31003-D3000-M100-01-76A9 Administrator User Manual page 154

Administration
Multiline Appearance/Keyset
154
Data required
• Rollover ring: Determines if a ring tone will signal an incoming call while a
call is active.
Value range: "Standard ring", "No ring", "Alert beep", "Alert ring"
Default: "Alert beep"
LED on registration: Determines if line LEDs will signal SIP registration.
Value range: "Yes", "No"
Default: "Yes"
Originating line preference: Selects the line to be used for outgoing calls.
Value range: "Idle line", "Primary", "Last", "None"
Default: "Idle line"
Terminating line preference: Determines which line with an incoming call
shall be selected for answering.
Value range: "Ringing line", "Incoming", "Incoming PLP", "Ringing PLP",
"None"
Default: "Idle line"
Line action mode: Determines the consequence for an established
connection when the line key is pressed.
Value range: "Hold", "Release"
Default: "Hold"
Show focus: Determines whether the line key LED blinks or is steady when
it is in use.
Value range: "Yes", "No"
Default: "Yes"
Reservation timer: Sets the period in seconds after which a line reservation
is cancelled. If set to 0, the reservation timer is deactivated.
Default: 60
Forward indication: Activates or deactivates the indication of station
forwarding.
Value range: "Yes", "No"
Default: "No"
Preselect mode: Determines whether an incoming call is accepted by a
single press on the corresponding line key or a double press is needed.
Value range: "Single button", "Preselection"
Default: "Single button"
Preselect timer: Sets the timeout in seconds for accepting an incoming call.
Bridging enabled : When set to "Yes", the user is allowed to join a call on a
shared line. For this purpose, a server based conference is established.
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013