Blind Call Transfer; Join Two Calls; Deflect A Call - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
Free Programmable Keys

3.8.10 Blind Call Transfer

3.8.11 Join Two Calls

3.8.12 Deflect a Call

132
A call is transferred without consultation, as soon as the phone goes on-hook or
the target phone goes off-hook.
INFO: This feature can be enabled or disabled under System >
Features > Feature access (see Feature Access).
Use the Key label <key number> field to define or change the name (label) of
the key.
Free Programmable Keys (FPKs) can be configured via the WBM or on the local
phone. For details regarding the different ways to configure program keys, please
refer to How to Configure Free Programmable Keys (FPKs).
Administration via WBM
System > Features > Program keys > Blind transfer
Related Topics
Call transfer, applicable when there is one active call and one call on hold. The
active call and the held call are connected to each other, while the phone that has
initiated the transfer is disconnected.
Use the Key label <key number> field to define or change the name (label) of
the key.
Free Programmable Keys (FPKs) can be configured via the WBM or on the local
phone. For details regarding the different ways to configure program keys, please
refer to How to Configure Free Programmable Keys (FPKs).
Administration via WBM
System > Features > Program keys > Transfer
Related Topics
On key press, an incoming call is deflected to the specified destination.
INFO: This feature can be enabled or disabled under System >
Features > Feature access (see Feature Access).
The target destination is defined in the Destination parameter field.
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013