How To Enable "Long Press" For Free Programmable Keys - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
Free Programmable Keys

3.8.2 How to Enable "Long Press" for Free Programmable Keys

Prerequisites
Step by Step
126
• At the phone, the configuration menu for a specific programmable key is
called by a long press on the related key.
INFO: The "long press" feature is disabled by default. It can be
enabled by activating the FPK program timer via Administration >
System > Features > Configuration > (General >) FPK program
timer. When this parameter is disabled, it is not possible to enter
the programming mode by long key press. However, the other
methods for key programming remain enabled. For keyset and
DSS functionality, please refer to Multiline Appearance/Keyset.
• The "long press" feature can be enabled or disabled by setting the FPK
program timer parameter to On (enabled) or Off (disabled). This can be
done either via the WBM Administrator pages or via the local phone´s
Admin menu, as described below.
› In the WBM Administrator pages, navigate to System > Features > Config-
uration and set the FPK program timer to On or Off. Click Submit to save
your changes.
OR
› In the local phone´s Admin menu, navigate to System > Features > Config-
uration > General > FPK program timer and set the value to On or Off.
Select Save&exit and press OK to save your changes.
On your phone, you can now activate the programming mode of a specific
programmable key by a long key press on the related key.
Example: Administration via WBM
System > Features > Configuration
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013