Table of Contents
Advertisement
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the
hear a signal tone.
To end: press the end call key
If the first internal participant presses the end call key
external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
¤ u
MENU
Alarm Clock
~
¤
When activated:
When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon
appear on the screen and the wake-up time will be displayed instead of the date.
Setting the wake-up time
¤ u
MENU
Alarm Clock
Enter the wake-up time in hours and minutes, then press OK.
Phone settings
For details on how to make audio settings, see menu overview
For details on how to set the system PIN on the base station, see the menu overview
Changing the display language
¤ u
¤
MENU
Settings
The current language is indicated by
If you accidentally choose a language you do not understand:
521
¤
MENU
(press the keys one after the other)
Activating/deactivating music on hold
You can make it so that your external participant hears music in case of internal recall and during call transfer.
P#Q5#1M
¤
MENU
¤
0 = off; 1 = on
enter number
Repeater mode
With a repeater you can increase the range of your base station. You will need to activate repeater mode (
Repeater mode and No Radiation mode (
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
registration to the base station will be retained.
¤ u
¤
MENU
Settings
a
Cancel the reset with
Restoring the base station
When restoring factory settings the No Radiation mode is deactivated, individual settings are reset and all lists are
deleted.
The date and time are retained.
Resetting the base via the menu
Handsets are still registered, the system PIN is not reset.
¤ u
¤
MENU
Settings
Resetting the base using the key on the base
All handsets are de-registered and the system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base. Hold down the registration/paging key on the
¢
base (
page 1) and reconnect the power cable to the base at the same time. Hold the key down for at least 5 seconds.
a
. All participants hear a signal tone.
¤
¤
¤
OK
Activation
(Set the wake-up time)
¤ u
¤
OK
Wake-up time
¤ u
¤
OK
Handset
OK
‰
.
¤
The number for the current setting flashes:
¤
OK.
¢
page 11) cancel each other out.
¤ u
¤
OK
Handset
OK
.
¤ u
¤ u
¤
OK
Base
OK
8
b
key. You can listen in to the call. All participants
a
, the handset that has "listened in" remains connected to the
‰
OK (
= on)
¤
OK
¤
OK
¢
page 11.
¤ u
¤
Language
OK
¤ u
(select language)
¤ u
¤
Reset Handset
¤
¤
Base Reset
OK
Reset?
¢
page 11.
¤ u
(select language)
¤
OK
¤
¤
OK
Reset?
OK
¤
OK
l
will
¤
OK
¢
page 11).
Advertisement
Table of Contents
