Character Set - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.4.5.4 Character Set

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
Minimum length defines the minimum number of characters for the user
password.
Password history specifies the number of entries to be kept in the user
password history.
The Current status parameter determines the status for the user password.
When set to Active, the user password is available for use. With Suspended, the
user password is not available for a period or until reset. When set to Disabled,
all access via the user password is disabled.
Administration via WBM
Security and Policies > Password > User Policy
Related Topics
The composition of the password can be configured in detail.
Ucase chars reqd. defines the minimum number of uppercase characters. Value
range: 0 to 24
Lcase chars reqd. defines the minimum number of lowercase characters. Value
range: 0 to 24
Digits required defines the minimum number of digits. Value range: 0 to 24
Special chars reqd defines the minimum number of special characters. The set
of possible characters is ` - = [ ] ; ' # \ , . / ¬ ! " £ $ % ^ & * ( ) _ + { } : @ ~ | < > ?
Value range: 0 to 24
Bar repeat length specifies the maximum number of consecutive uses of a
character. Value range: 0 to 24, but not 1 (with 1 set as value, no password would
be valid, because it would be forbidden to use any character once).
Min char difference specifies the minimum number of characters by which a new
password must differ from the previous password. Value range: 0 to 24
Administration
Security
75