Server Based Features - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.7.10 Server Based Features

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
INFO: Please note that the Server features parameter, despite
the name similarity, is not related to the Server feature function-
ality as described in Server Feature.
The use of server based call forwarding and server based DND is enabled or
disabled here. When phone based DND and phone based call forwarding are to
be used, Server features must be deactivated. This is the default setting. For
using server based Call Forwarding or server based DND, it must be activated.
INFO: Server features is deactivated automatically if System >
Registration > Server type (see SIP Registration) is set to
"HiQ8000".
INFO: Before switching Server features on or off, please ensure
that both Call Forwarding and DND are not activated. Otherwise,
the user will not be able to control the feature any more.
It is recommended to set Server features when setting up the
phone, and avoid further changes, as possible.
INFO: To enable server based features, uaCSTA must be allowed
(see uaCSTA Interface).
Administration
Feature Configuration
117