Call Transfer; Transfer On Ring; Transfer On Hangup - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.7.5 Call Transfer

3.7.5.1 Transfer on Ring

3.7.5.2 Transfer on Hangup

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
|--- MLPP ringer
|--- Callback ringer
|--- Lower IL ringer
Related Topics
Related Topics
If this function is active, a call can be transferred after the user has dialed the third
participant's number, but before the third party has answered the call. This feature
is enabled or disabled in the User menu. The default is "Yes".
Administration via WBM
(User) Configuration > Outgoing calls
Administration via Local Phone
|
--- User
|--- Configuration
|--- Outgoing calls
|--- Transfer on ring
Related Topics
This feature applies to the following scenario: While A is talking to B, C calls A. A
accepts the call, so B is on hold and the call between A and C is active. If Transfer
on hangup is enabled, and A goes on-hook, B gets connected to C. If disabled,
C will be released when A hangs up, and A has the possibility to reconnect to B.
By default, the feature is disabled.
Administration
Feature Configuration
111