Remote Tracing - Syslog - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
Diagnostics
3.23.13 Remote Tracing – Syslog
222
If one or more core dump file exist, hyperlinks for downloading will be created
automatically.
Administration via WBM
Diagnostics > Miscellaneous > Core dump
Related Topics
All trace messages created by the components of the phone software can be sent
to a remote server using the syslog protocol. This is helpful especially for long-
term observations with a greater number of phones.
To enable remote tracing, Remote trace status must be set to "Enabled".
Furthermore, the IP address of the server receiving the syslog messages must be
entered in Remote Server, and the corresponding server port must be given in
Remote Server Port.
The User Notification parameter controls whether the user is notified about the
remote tracing or not. If user notification is enabled, a blinking symbol (
OpenScape Desk Phone IP 55G;
inform the user when remote tracing is active, that is, when Remote Trace Status
is set to "Enabled".
Administration via Local Phone
|
--- Admin
|--- Maintenance
|--- Remote trace
|--- Remote trace status
|--- User notification
|--- Remote ip
|--- Remote port
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
on OpenScape Desk Phone IP 35G) will
A31003-D3000-M100-01-76A9, 02-2013
on