Preview And Preselection - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.11.4.1 Preview and Preselection

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
The preview mode can be configured as temporary or as permanent. If System
> Features > Keyset operation > Preview mode is disabled, preview mode will
end when the user uses the previewed line, or a new call is started in any other
way, or if the focus is changed away from call view. If the parameter is enabled,
preview mode remains active until the user cancels it by pressing the key again.
The Preview timer parameter determines the time span during which the line
preview will remain on the screen.
The Bridging priority parameter affects the behavior of the line key (see Preview
and Preselection). Precondition: Bridging is enabled (see Configure Keyset
Operation)
Administration via WBM
System > Features > Program keys > Preview
Related Topics
Precondition: Bridging is enabled
Action Preselect
mode
Single
button
Preview key is not pressed (LED off), only the Line key is pressed once or twice
Press busy -
second. line
key 1x
Press busy -
second. line
key 2x while
line-view is dis-
played
Press busy yes
second. line
key 1x
Preview key is pressed first (LED on) and the Line key is pressed once or twice
Press busy n.rel.
second. line
key 1x
Preview mode Bridging priority Result
Pre- On Off Preview
selec- (Lock (Temp over-
tion Prev.) Prev.) rides
bridging
yes n.rel. n.rel. n.rel.
yes n.rel. n.rel. n.rel.
- n.rel. n.rel. n.rel.
n.rel. - yes -
Administration
Multiline Appearance/Keyset
Bridg-
ing over-
rides
preview
n.rel. Line status is dis-
played (Preselect
timer)
n.rel. 1st press: line sta-
tus
2nd press: bridge
(conference)
n.rel. Bridge (confer-
ence)
yes Bridge (confer-
ence)
Preview LED -> off
157