Table of Contents
Advertisement
Administration
LAN Settings
3.2 LAN Settings
3.2.1 LAN Port Settings
42
Related Topics
The OpenScape Desk Phone IP 35G provides an integrated switch which
connects the LAN, the phone itself and a PC port. By default, the switch will auto
negotiate transfer rate (10/100 Mb/s, 1000 Mb/s with OpenScape Desk Phone IP
35G) and duplex method (full or half duplex) with whatever equipment is
connected. Optionally, the required transfer rate and duplex mode can be
specified manually using the LAN port speed parameter.
INFO: In the default configuration, the LAN port supports
automatic detection of cable configuration (pass through or
crossover cable) and will reconfigure itself as needed to connect
to the network.
The PC Ethernet port (default setting: Disabled) is controlled by the PC port
mode parameter. If set to "Disabled", the PC port is inactive; if set to "Enabled", it
is active. If set to "Mirror", the data traffic at the LAN port is mirrored at the PC
port. This setting is for diagnostic purposes. If, for instance, a PC running
Ethereal/Wireshark is connected to the PC port, all network activities at the
phone's LAN port can be captured.
INFO: Removing the power from the phone, or a phone reset/
reboot will result in the temporary loss of the network connection
to the PC port.
When PC port autoMDIX is enabled, the switch determines automatically whether
a regular MDI connector or a MDI-X (crossover) connector is needed, and
configures the connector accordingly.
Data required
•
LAN port speed / LAN port type: Settings for the ethernet port connected to a
LAN switch. Value range: "Automatic," "10 Mbps half duplex", "10 Mbps full
duplex", "100 Mbps half duplex", "100 Mbps full duplex". Default: "Automatic"
•
PC port speed / PC port type: Settings for the ethernet port connected to a
PC. Value range: "Automatic," "10 Mbps half duplex", "10 Mbps full duplex",
"100 Mbps half duplex", "100 Mbps full duplex". Default: "Automatic"
•
PC port mode / PC port status: Controls the PC port. Value range: "disabled",
"enabled", "mirror". Default: "disabled"
•
PC port autoMDIX: Switches between MDI and MDI-X automatically. Value
range: "On", "Off" Default: "Off"
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013
Advertisement
Table of Contents
Troubleshooting
