Siemens A31003-D3000-M100-01-76A9 Administrator User Manual page 66

Administration
IP Network Parameters
66
TraceEventError: sent if severe trace events occur; aimed at expert users.
Data required
• Trap sending enabled: Enables or disables the sending of a TRAP message
to the SNMP manager.
Value range: "Yes", "No"
Default: "No"
• Trap destination: IP address or host name of the SNMP manager that
receives traps.
• Trap destination port: Port on which the SNMP manager is receiving TRAP
messages.
Default: 162
• Trap community: SNMP community string for the SNMP manager receiving
TRAP messages.
Default: "snmp"
• Queries allowed: Allows or disallows queries by the SNMP manager.
• Query password: Password for the execution of a query by the SNMP
manager.
• Diagnostic sending enabled: Enables or disables the sending of diagnostic
data to the SNMP manager.
Value range: "Yes", "No"
Default: "No"
• Diagnostic destination: IP address or host name of the SNMP manager
receiving diagnostic data.
• Diagnostic destination port: Port on which the SNMP manager is receiving
diagnostic data.
• Diagnostic community: SNMP community string for the SNMP manager
receiving diagnostic data.
• Diagnostic to generic destination / Diagnostic to generic device: Enables
or disables the sending of diagnostic data to a generic destination.
Value range: "Yes", "No"
Default: "No"
• QoS traps to QCU: Enables or disables the sending of TRAP messages to
the QCU server.
Value range: "Yes", "No"
Default: "No"
• QCU address: IP address or hostname of the QCU server.
• QCU port: Port on which the QCU server is listening for messages.
Default: 12010.
• QCU community: QCU community string.
Default: "QOSCD".
• QoS to generic destination: Enables or disables the sending of QoS traps
to a generic destination.
Value range: "Yes", "No"
Default: "No"
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013